Well Service Fracturing Pump Packing Seals are commonly used in high-pressure mud pumps and fracturing pumps, as a high-speed reciprocating dynamic seals. Its main function is to prevent plungers from leakage in high-speed reciprocating. Some special working conditions are taken into consideration when designing its structure and material, which make it apply to fracturing fluid, mud mediums and so on.
jst-seals 4 Inch Fracturing Pump Packing Seals were supplied to Sinopec East China Oil & Gas Company. They were installed on the fracturing pump (2800 type, 120Mpa, 5-cylinder) under Shale Gas Well (196-1HF), located at Shuijiang Town, Nanchuan Distric, Chongqin City.
- Product and Installation
- Testing Equipment
Fracturing truck (2800 type, 120Mpa, 5-cylinder)
- Conclusion
JST packing seals have been working excellently without leakage under the working conditions of average pressure of 85MP, sand content ratio of 14%, continuous fracturing of 32 layers (about 110 hours) with acid. No obvious damage to the seal after dismounting, which could be used furtherly.
Pic. JST 4 inch Fracturing Pump Packing Seals after testing